CE OEM Factory Price Tire Rubber Drum Vulcanizer Brand Vulcanizing
Machine For Clothes
Fulund vulcanizer maintenance should pay attention to the following
issues:
1. The storage environment of the vulcanizer should be kept dry and
well ventilated to avoid dampness of electrical circuits due to
humidity;
2. Do not use the vulcanizer outdoors in rainy days to prevent
water from entering the electric control box and heating plate;
3. If the working environment is humid and watery, when dismantling
and transporting the vulcanizing machine, the items should be
raised on the ground, and the vulcanizing machine should not be in
direct contact with water;
4. If water enters the heating plate due to improper operation
during use, you should first contact the manufacturer for
maintenance. If emergency repairs are needed, open the cover on the
heating plate, pour out the water first, then set the electric
control box to manual operation, heat it to 100°C, keep it at a
constant temperature for half an hour, dry the circuit, and put it
in the Belt gluing is performed manually. At the same time, the
manufacturer should be contacted in time for the overall
replacement of the line;
5. When the vulcanizer does not need to be used for a long time,
the heating plate should be heated every half a month (the
temperature is set at 100 ℃), and the temperature should be
maintained for about half an hour;
6. After each use, the water in the water pressure plate should be
cleaned up, especially in winter, if the water cannot be cleaned,
it will often lead to premature aging of the water pressure plate
rubber and reduce the service life of the water pressure plate;
The correct way to release the water is to carry out the
vulcanization machine after the vulcanization and heat preservation
is completed and before the vulcanizer is disassembled. If the
water is discharged after the machine is disassembled, the water in
the water pressure plate may not be completely drained.
Introduction to the structure of the vulcanizer:
1. Structural stability: a special four-column structure is
adopted, the upper seat is reinforced with medium carbon steel, and
the upright column is thickened and hardened to ensure structural
stability and accuracy.
2. System: The high plane pressure equalization correction is
adopted, and the pressure (18mpa) strengthens the nut leveling
device, which can increase the parallelism of the upper and lower
heating plates to 0.05mm.
3. Temperature control system: Adjustable from room temperature to
350°C, using intelligent temperature control to control the
temperature fluctuation range within ±2°C.
4. Operating system: PLC combined with touch screen, whether
debugging or production, can be controlled directly and simply.
5. Operating system: The optimally designed oil circuit and
high-quality oil circuit accessories ensure the smooth operation of
the entire oil circuit system from the principle and accessories.
6. Energy-saving system: The heating plate adopts the deep hole
processing technology, which is closely matched with the heating
pipe to reduce the heat loss during the heat transfer process.
7. The intelligent system can automatically push out the mold,
thereby reducing the labor time of the staff, increasing
efficiency, high output and saving time.
Scope of application:
Children's toys, baby products, kitchen supplies, clothing labels,
equipment seals, etc.
